A Review of Layer Based Manufacturing Processes for Metals

The metal layered manufacturing processes have provided industries with a fast method to build functional parts directly from CAD models. This paper compares current metal layered manufacturing technologies from including powder based metal deposition, selective laser sinstering (SLS), wire feed deposition etc. The characteristics of each process, including its industrial applications, advantages/disadvantages, costs etc are discussed. In addition, the comparison between each process in terms of build rate, suitable metal etc. is presented in this paper.Mechanical Engineerin

RESH: A Secure Authentication Algorithm Based on Regeneration Encoding Self-Healing Technology in WSN

In the real application environment of wireless sensor networks (WSNs), the uncertain factor of data storage makes the authentication information be easily forged and destroyed by illegal attackers. As a result, it is hard for secure managers to conduct forensics on transmitted information in WSN. This work considers the regeneration encoding self-healing and secret sharing techniques and proposes an effective scheme to authenticate data in WSN. The data is encoded by regeneration codes and then distributed to other redundant nodes in the form of fragments. When the network is attacked, the scheme has the ability against tampering attack or collusion attack. Furthermore, the damaged fragments can be restored as well. Parts of fragments, encoded by regeneration code, are required for secure authentication of the original distributed data. Experimental results show that the proposed scheme reduces hardware communication overhead by five percent in comparison. Additionally, the performance of local recovery achieves ninety percent

Numerical Simulation and Prediction of Dilution during Laser Deposition

The laser additive manufacturing technique of laser deposition allows quick fabrication of fully-dense metallic components directly from Computer Aided Design (CAD) solid models. The applications of laser deposition include rapid prototyping, rapid tooling and part refurbishment. The development of an accurate predictive model for laser deposition is extremely complicated due to the multitude of process parameters and materials properties involved. In this work, a heat transfer and fluid flow model is developed. The model is used to predict dilution under varying process parameters for deposits of Ti-6Al-4V. Experimental validation of the predicted dilution is presented. The laser used is a direct diode lase

Numerical Simulation of the Evolution of Solidification Microstructure in Laser Deposition

A predictive model is developed to simulate the evolution of the solidification microstructure during the laser deposition process. The microstructure model is coupled with a comprehensive macroscopic thermodynamic model. This model simulates dendritic grain structures and morphological evolution in solidification. Based on the cellular automata approach, this microstructure model takes into account the heterogeneous nucleation both within the melt pool and at the substrate/melt interface, the growth kinetics, and preferential growth directions of dendrites. Both diffusion and convection effects are included. This model enables prediction and visualization of grain structures during and after the deposition process. This model is applied to Ti-6Al-4V

Microstructural Characterization of Diode Laser Deposited Ti-6Al-4V

Laser Direct Metal Deposition (DMD) is an effective approach to manufacturing or repairing a range of metal components. The process is a layer-by-layer approach to building up a three dimensional solid object. The microstructure influences mechanical properties of the deposited parts. Thus, it is important to understand the microstructural features of diode laser deposited parts. This paper presents a microstructure analysis of a diode laser deposited Ti-6Al-4V onto a Ti-6Al-4V substrate. laser deposited parts. This paper presents a microstructure analysis of a diode laser deposited Ti-6Al-4V onto a Ti-6Al-4V substrate

Evaluation of Direct Diode Laser Deposited Stainless Steel 316L on 4340 Steel Substrate for Aircraft Landing Gear Application

300M steel is used extensively for aircraft landing gears because of its high strength, ductility and toughness. However, like other high-strength steels, 300M steel is vulnerable to corrosion fatigue and stress corrosion cracking, which can lead to catastrophic consequences in the landing gear. Stainless steels offer a combination of corrosion, wear, and fatigue properties. But for an aircraft landing gear application a higher surface hardness is required. A laser cladding process with fast heating and cooling rates can improve the surface hardness. AISI 4340 steel is used as a lower cost alternative to 300M due to its similar composition. In this study, the influence of laser cladding process parameters, shield gas, and composition of the deposition and dilution zone has been investigated. The microstructures and composition analysis were evaluated by Scanning Electron Microscopy (SEM) and Optical Microscopy. The deposition hardness varies from 330HV to 600HV

Two new species of the Longitarsus violentus group from China (Coleoptera, Chrysomelidae, Galerucinae, Alticini)

Two new species of Longitarsus Latreille, 1829 from China are described: L. pekingensis Liang, Konstantinov & Ge, sp. nov. (Beijing) and L. xinjiangensis Liang, Konstantinov & Ge, sp. nov. (Xinjiang). Images of dorsal and lateral habitus, pronotum, head, and male and female genitalia are provided. The records of Longitarsus violentus Weise, 1893 and Longitarsus weisei Guillebeau, 1895 in China are discussed. Holotypes of L. marguzoricus Konstantinov in Konstantinov & Lopatin, 2000 and L. violentoides Konstantinov in Konstantinov & Lopatin, 2000 are illustrated with images of pronotum and median lobe of aedeagus. A key to species of L. violentus species group is provided

Defect Analysis in Microgroove Machining of Nickel-Phosphide Plating by Small Cross-Angle Microgrooving

Crystalline nickel-phosphide (c-Ni-P) plating is a newly developed mold material for precision glass molding (PGM) to fabricate microgrooves. In the ultraprecision cutting process of the c-Ni-P plating material, the neighboring microgrooves are required to adjoin with each other to ensure acute microgroove ridges and miniaturize the microgroove size. Generally, defects of burrs and fracture pits can easily occur on the ridges when the plating layer is grooved. Burrs appear when tears dominate in material removal with a large adjacent amount. With the change of the adjacent amount, the removed material is sheared out from the workpiece, and when the cutting depth of the groove ridge is over the brittle-ductile transition thickness, fracture pits arise. To restrict these defects, a small cross-angle microgrooving method is proposed to test the critical adjacent amount range efficiently. It is found that an acute ridge of the microgroove is formed with a small enough adjacent amount; when this amount is in the range of 570 nm~720 nm in the microgroove machining process, fracture pits begin to arise on the gradient edge. High-quality microgrooves can be obtained based on this methodology

A novel class of microRNA-recognition elements that function only within open reading frames.

MicroRNAs (miRNAs) are well known to target 3' untranslated regions (3' UTRs) in mRNAs, thereby silencing gene expression at the post-transcriptional level. Multiple reports have also indicated the ability of miRNAs to target protein-coding sequences (CDS); however, miRNAs have been generally believed to function through similar mechanisms regardless of the locations of their sites of action. Here, we report a class of miRNA-recognition elements (MREs) that function exclusively in CDS regions. Through functional and mechanistic characterization of these 'unusual' MREs, we demonstrate that CDS-targeted miRNAs require extensive base-pairing at the 3' side rather than the 5' seed; cause gene silencing in an Argonaute-dependent but GW182-independent manner; and repress translation by inducing transient ribosome stalling instead of mRNA destabilization. These findings reveal distinct mechanisms and functional consequences of miRNAs that target CDS versus the 3' UTR and suggest that CDS-targeted miRNAs may use a translational quality-control-related mechanism to regulate translation in mammalian cells